Ingersoll Rand Screw Compressor Air Oil Separator 54595442
Screw air compressor oil separator: Screw air compressor oil air separator is normal work, affect the
air compressor system output is pure available.
Air compressor in the use of the process to replace the oil
separator in time, a general time for 3000- 5000 hours, this should
be adjusted according to the merits of the use environment.
We choose the most advanced antiseptic high-efficiency superfine
fiber agglomeration materials as our main filtration, which is
composed of pre filter layer, superfine fiber layer, supporting
layer, gravity layer, etc. It can filter all solid particles which
are bigger than 3μm, while for very tiny oil-gas dissolutions
(about 0.01-1μm), when filtered, they agglomerate into big oil
drops at the bottom, and then returned to lubrication system
through siphon by oil return pipe in order to make compressor expel
cleaner and oilless compressed air.
|Machine Model||Separator||Air Filter||Oil Filter|
The pressure cannot rise or rise to a certain level and then it
cannot rise again:
Cause of issue:
1.The safety valve leaks.
2.The screw hole leaks.
3.Piston ring leaks.
4.The cylinder head asbestos rubber gasket is broken or uneven.
5.Leakage of exhaust or drain valve.
1.Dismantle or replace the safety valve.
2.Tighten the screw or flatten the gasket before pinning.
3.Replace the piston ring.
4.Replace asbestos rubber sheet.
5.Replace the exhaust valve group and drain valve