High Quality Customization Replaced Vacuum Pump Oil Mist Filters
Filters are available for the removal of oil mist from vacuum pump
exhaust gases. The units are disposable and must be fitted
vertically. Each unit consists of a microfibre element permanently
- Select the installation position for the filter and gas-water
separator, which must be the pipeline pressure relief before
- Install the vacuum filter and air-water separator on the pipeline
vertically. Install the arrow on the vacuum pump filter to confirm
the flow direction. The screw filter needs to use raw material belt
or sealing material to ensure the sealing. The maximum working
pressure, maximum working temperature and filter element have been
marked on the outer shell of the filter.3. In order to make the
replacement of filter element simple, pay attention to reserve the
removal position for screw filter and flange filter. The minimum
reserved position is marked with D on the dimension drawing.
- Equipped with automatic drainer with manual function, and equipped
with manual drainer for medical sterilization, vacuum, dust removal
and medical vacuum filter.
- During the initial pressurization of the system, slowly open the
intake valve to slow down the air flow until the system pressure is
stable, and ensure that the filter and air-water separator do not
leak before use.
- Regularly check the drainage level under the filter, and timely
pour out the condensate. First, close the valve between the filter
and the liquid bottle, and turn it anticlockwise to write down the
liquid bottle. When installing the drain bottle, install and
tighten it clockwise, open the valve, and check whether there is
- The product is made of imported glass fiber filter material.
Filtration accuracy up to 0.3um and 99.97% efficiency.
- The sealing ring is made of high quality oil resistant and high
temperature resistant materials with good sealing performance
- Made of high quality filter cotton. The joint is welded by
ultrasonic wave, which is firm and beautiful.
- The top end cover is made of imported Dupont PA66+GF30, oil
resistant, high temperature resistant, high strength and not easily
- The unloading valve has advanced structural design. When the oil
deteriorates and clogs the filter, the air pressure in the
equipment will be too high. The unloading valve will automatically
open to release pressure, effectively protecting your device.
Vacuum Pump Filters